Open main menu

Fuse

type of low resistance resistor that acts as a sacrificial device to provide overcurrent protection, of either the load or source circuit
Several small fuses

A fuse is a device that shuts off the power to an electrical circuit when too much electric current flows through it. This usually happens when too many appliances are plugged in or when there is a short circuit. A fuse is made as an intentional weak spot in a circuit that will melt (or "blow") when too much current is flowing through it, shutting off the power to the rest of the circuit. This protects the rest of the circuit. After the fuse blows, the problem that caused it to blow must be corrected and the fuse must be replaced to restore power to the circuit. A circuit breaker does the same job as a fuse, but it can be reset without replacing anything. Fuses in plugs are made in standard ratings. The most common are 3 A, 5 A and 13 A. The fuse should be rated at a slightly higher current than the device needs. e.g. if the device works a 3 A use 5 A fuse. There are two speeds of fuses, fast acting, which will blow immediately once its current rating is exceeded, and slow blow, which will let the current exceed the rating for a fraction of a second, to allow devices like motors to start up.

Other websitesEdit