Organic light-emitting diode
Organic light-emitting diode (OLED) is a type of light-emitting diode (LED). The part of the OLED that creates light is made of a very thin layer of organic compounds. The main use of OLED technology is for flat panel displays for smartphones and other mobile devices where they are in some ways better than LCDs. OLEDs can be used to make displays that can bend. These can be used in many different ways. For example, they can be used in clothing.
Advantages and disadvantagesEdit
LCDs are in some ways better than OLEDs and some ways worse. OLEDs can make more colors and levels of brightness than LEDs. Unlike LCDs their colors do not change when viewed at an angle. They are also much cheaper to make. OLEDs make light, so they do not need a light shining through from the back as LCDs do. This also makes black parts of the screen able to be fully turned "off" making them darker. LCDs also need to use filters to work properly. These filters block much of the light created by the LED/CCFL. Because of backlighting and filtering, OLEDs use far less power than LCDs for the amount of light made. OLEDs also react faster to changes in electricity. They turn on and off much faster than LCDs.
LEDs will last longer than OLEDs. This is the biggest problem with OLEDs. Currently most OLEDs used in displays will work for about 5,000 hours of use. LEDs normally work for 60,000 hours. This may change as experiments in 2007 created a type of OLED that worked for 198,000 hours. The organic compounds that make up OLEDs are also more easily damaged by water.
How they workEdit
There are several parts to an OLED:
- Substrate: the material the layers of the OLED are put on
- Emissive layer: the layer where light is made
- Conductive layer
When electricity is applied to an OLED, the emissive layer becomes negatively charged and the conductive layer becomes positively charged. Electrostatic forces cause electrons to move from the positive conductive layer toward the negative emissive layer. This causes a change in the electrical levels and makes radiation that has a frequency in the range of visible light.
OLED, as with all diodes, can only work if electricity flows through them in the correct direction. The Anode, connected to the emmisive layer must be at a higher electrical potential (more volts, more positive) than the cathode, connected to the conductive layer, for the OLED to work.