Iberian-gauge railways
Iberian gauge is a railway track gauge of 1,668 mm (5 ft 5 21⁄32 in), used by the railways of Spain and Portugal. This is the second-widest gauge in regular use anywhere in the world. Indian gauge railways, 5 ft 6 in (1,676 mm), are 8 mm (5⁄16 in) wider.
In 1955,[1] the Iberian gauge was a compromise between the slightly different, gauges in Spain and Portugal. The main railway networks of Spain were built to a 1,672 mm (5 ft 5 13⁄16 in) gauge of six Castilian feet. In Portugal they were first built to a 1,435 mm (4 ft 8 1⁄2 in) and later to a 1,664 mm (5 ft 5 1⁄2 in) gauge of five Portuguese feet – close enough to allow interoperability with Spanish railways.[2]
Standard gauge
changeSince the 1990s new high-speed passenger lines in Spain have been built to the international standard gauge of 1,435 mm (4 ft 8 1⁄2 in), to allow these lines to link to the European high-speed network. Although the 22 km from Tardienta to Huesca (part of a branch from the Madrid to Barcelona high-speed line) has been reconstructed as mixed Iberic and standard gauge, in general the interface between the two gauges in Spain is dealt with by means of gauge-changing installations, which can adjust the gauge of appropriately designed wheelsets on the move.[3][4]
There are plans to convert more of the Iberian-gauge network in Spain and Portugal to standard gauge. Concrete sleepers pre-drilled with additional bolt holes allow for moving one rail to adjust the track to standard gauge (or to dual gauge) or the narrowing of the gauge by moving both rails closer together maintaining the perfect alignment of the loading gauge.[5][6]
Similar gauges and compatibility
changeThe Indian gauge (1,676 mm or 5 ft 6 in) is closely similar, with only 8 mm (5⁄16 in) difference. Chile and Argentina have bought second hand Spanish/Portuguese Iberian-gauge rolling stock. 1,668 mm trains can run on 1,676 mm gauge without adaptation, but for better stability in high-speed running a replacement wheelset may be required. Due to the narrower gauge, a strong wear of the wheels may occur if the wheelset is not replaced.
Iberian-gauge railway networks
change| Country/territory | Railway |
|---|---|
| Portugal | Infraestruturas de Portugal network. Adjusted from the original 1,664 mm (5 ft 5 1⁄2 in) in the 19th century. Other gauges used in Portugal: 7 ft 1⁄4 in (2,140 mm)[7] or 7 ft (2,134 mm)[8] (Azores), 1,435 mm (4 ft 8 1⁄2 in), 1,000 mm (3 ft 3 3⁄8 in), 900 mm (2 ft 11 7⁄16 in), and 600 mm (1 ft 11 5⁄8 in) |
| Spain | Adjusted from the original 1,672 mm (5 ft 5 13⁄16 in) in the 19th century. Adif-managed national railway network (except new high-speed railway lines). Although Lleida–La Pobla de Segur Line is both managed and operated by Ferrocarrils de la Generalitat de Catalunya (FGC), it was formerly part of the national railway network and was constructed to the 1,668 mm (5 ft 5 21⁄32 in) gauge. Barcelona Metro line 1 still uses the former 1,672 mm (5 ft 5 13⁄16 in) gauge. |
References
change- ↑ Christian García Enseleit (November 2010). "Sistemas automáticos de cambio de ancho de vía en España" [Automatic gauge changing systems in Spain] (PDF) (in Spanish). Archived from the original (PDF) on 2012-01-19. Retrieved 2021-12-05.
- ↑ The gauge of the early Portuguese lines built to the "English" (later: international) gauge was subsequently altered to Iberian to ensure interoperability – Assim, em 20 de Junho de 1860, funda a Companhia Real dos Caminhos de Ferro Portugueses que se propõe explorar as Linhas do Norte e do Leste e as linhas de que posteriormente obtivesse concessão. Thus, on June 20, 1860, founded the Society of Real Caminhos de Ferro Portugueses it proposes to exploit the lines of North and the East and the lines that subsequently obtain concession. De imediato a Companhia Real muda a bitola (1,44 metros) da linha já construída entre Lisboa e Asseca (68 Km.), passando-a para a bitola ibérica, com 1,67 metros, sem haver qualquer interrupção no serviço ferroviário. From immediate changes to the Company Real gauge (1.44 m) of the line already built between Lisbon and of Asseca (68 km), passing it to gauge the Iberian, with 1.67 metres, without any interruption in rail service. "Pequena história dos Caminhos de Ferro em Portugal" [Short History of the Railways in Portugal]. Archived from the original on 2008-03-27. Retrieved 2009-10-13. [1]
- ↑ Talgo Date=2008-09-04 Archived 2007-09-28 at the Wayback Machine
- ↑ :: CAF - Construcciones y Auxiliar de Ferrocarriles, we create railway solutions :: Archived 2012-02-04 at the Wayback Machine
- ↑ "Verkehrsrundschau, 2007-04-30". Archived from the original on 2019-01-29. Retrieved 2010-08-21.
- ↑ "Reisebranche - TRAVEL INSIDE".
- ↑ Churcher, Colin. "Broad Gauge Railway Relics in the Açores". Archived from the original on June 28, 2011. Retrieved May 3, 2011.
... the broad gauge of 7 feet 0¼ inches ... was that chosen by Isambard Kingdom Brunel for the Great Western Railway.
- ↑ Kers, Ernst. "Açores: Broad gauge harbor line". Archived from the original on March 14, 2011. Retrieved May 3, 2011.
... Stöckl did measure the gauge himself: 7 foot / 2134 mm! The gauge which was favoured by Brunel in the 19th century in England ...