Lumber

wood that has been processed into beams and planks

Lumber (or timber) is wood that has been cut for use in building.

Mountain ash logs at a sawmill in Australia

Dimensional lumber change

Dimensional lumber is a term used in North America for lumber that is finished/planed and cut to standardized width and depth specified in inches.

Softwoods change

Softwood Dimensional Lumber Sizes
Nominal Actual Nominal Actual
1 × 2 ¾″ × 1½″ (19×38 mm) 2 × 2 1½″ × 1½″ (38×38 mm)
1 × 3 ¾″ × 2½″ (19×64 mm) 2 × 3 1½″ × 2½″ (38×64 mm)
1 × 4 ¾″ × 3½″ (19×89 mm) 2 × 4 1½″ × 3½″ (38×89 mm)
1 × 6 ¾″ × 5½″ (19×140 mm) 2 × 6 1½″ × 5½″ (38×140 mm)
1 × 8 ¾″ × 7¼″ (19×184 mm) 2 × 8 1½″ × 7¼″ (38×184 mm)
1 × 10 ¾″ × 9¼″ (19×235 Mm) 2 × 10 1½″ × 9¼″ (38×235 mm)
1 × 12 ¾″ × 11¼″ (19×286 mm) 2 × 12 1½″ × 11¼″ (38×286 mm)
3 × 4 2½″ × 3½″ (64×89 mm) 2 × 14 1½″ × 13¼″ (38×337 mm)
4 × 4 3½″ × 3½″ (89×89 mm) 6 × 6 5½″ × 5½″ (140×140 mm)
4 × 6 3½″ × 5½″ (89×140 mm) 8 × 8 7¼″ × 7¼″ (184×184 mm)

Examples of common sizes are 2×4 (also two-by-four and other variants), 2×6, and 4×4. The length of a board is usually specified separately from the width and depth. It is thus possible to find 2×4s that are four, eight, or twelve feet in length. In the United States the standard lengths of lumber are 6, 8, 10, 12, 14, 16, 18, 20, 22, and 24 feet.

Non-North American sizes change

Examples of Dimensional Lumber Sizes (Softwood and Hardwood)
Inch name Sawed Swedish Australian
2 × 4 50 x 100 mm 45 × 95 mm 45 x 90 mm
1 × 3 25 × 75 mm 22 × 70 mm 19 x 70 mm
3 × 3 75 × 75 mm 70 × 70 mm 70 x 70 mm
2 × 7 50 × 175 mm 45 × 170 mm Not used
2 × 3 50 × 75 mm 45 × 70 mm 45 x 70 mm
1 × 4 25 × 100 mm 22 × 95 mm 19 x 90 mm
1 × 5 25 × 125 mm 22 × 120 mm 19 x 120 mm
2 × 5 50 × 125 mm 45 × 120 mm 45 x 120 mm

Outside North America sizes of timber vary slightly. Sizes are, in some cases, based on the imperial measurement and referred to as such; in other cases the sizes are too far removed from the imperial size to be referred to by imperial measurement. Lengths can be sold at every 300 mm (a metric approximation of 1'). Common sizes are similar to the North American equivalent; 2.4, 2.7, 3.0, 3.6, 4.2, 4.8, 5.4, 6.0. But also in running lengths, where each plank in a given packet is different, from 2500mm to 5500mm, though shorter and longer may be present.

Hardwoods change

Hardwood Dimensional Lumber Sizes
Nominal Surfaced 1 Side (S1S) Surfaced 2 sides (S2S)
⅜″ ¼″ 3/16″
½″ ⅜″ 5/16″
⅝″ ½″ 7/16″
¾″ ⅝″ 9/16″
1″ or 4/4 ⅞″ 13/16″
1¼″ or 5/4 1⅛″ 1-1/16″
1½″ or 6/4 1⅜″ 1-5/16″
2″ or 8/4 1-13/16″ 1¾″
3″ or 12/4 2-13/16″ 2¾″
4″ or 16/4 3-13/16″ 3¾″

In North America sizes for dimensional lumber made from hardwoods varies from the sizes for softwoods. Boards are usually supplied in random widths and lengths of a specified thickness, and sold by the board-foot (144 cubic inches).

Engineered Lumber change

Engineered lumber is lumber created by a manufacturer and designed for a certain structural purpose.

Related pages change

Other websites change